This search combines search strings from the content search (i.e. "Full Text", "Author", "Title", "Abstract", or "Keywords") with "Article Type" and "Publication Date Range" using the AND operator.
Beilstein J. Nanotechnol. 2021, 12, 1173–1186, doi:10.3762/bjnano.12.87
Figure 1: SEM images of (a–c) fibres without cobalt additives and (d–f) fibres with 1.0 wt % Co.
Figure 2: EDX mapping results of a fibre mat containing cobalt, after carbonisation at (a–d) 700 °C and (e–h)...
Figure 3: XRD diffractograms of fibres with (a) 1.0 wt % Co and (b) without additives, carbonised at the indi...
Figure 4: (a–c) Selected Co 2p XPS spectra of samples containing cobalt carbonised at the indicated temperatu...
Figure 5: Raman spectra normalised to the height of the D peak for samples with (a) 1.0 wt % Co and (b) witho...
Figure 6: (a) Exemplary XPS C 1s range of a sample containing cobalt carbonised at 900 °C, (b) relative area ...
Figure 7: (a) Calculated ratio of molar fractions of nitrogen and carbon and (b) pyridinic nitrogen and the p...
Figure 8: Linear sweep voltammetry measurements of fibre-based electrodes using fibres carbonised at the indi...
Figure 9: (a) EOCP values from LSV measurements. (b) Current density at a given overpotential of 100 mV vs EO...
Figure 10: Potential during chronopotentiometry applying constant current densities of 2, 4, 6, and 2 mA·cm−2 ...
Beilstein J. Nanotechnol. 2018, 9, 1536–1543, doi:10.3762/bjnano.9.144
Figure 1: Diffraction patterns measured on glass for (a) the p-polarization, the inset illustrates a line pro...
Figure 2: Schematic of the analysis performed on the optical images, showing (a) the initial optical image, (...
Figure 3: (a) Topography maps acquired on a nanotriangle array, (b) PMT images obtained after filtering, and ...
Figure 4: (a) Topography and (b) PMT image after filtering obtained with the 632.8 nm s-polarized laser excit...
Figure 5: (a) Topography and (b) PMT image after filtering obtained with the 532.1 nm p-polarized laser excit...